Antigua Winds
AW Reeds
Page 1 of 2 12 LastLast
Results 1 to 20 of 25
  1. #1

    Join Date
    Jan 2010
    Location
    London
    Posts
    605

    Default Selmer Series III v Yamaha 82Z

    What are the differences between these two tenors? Which is brighter? Which has more resistance? Which is louder? Which is closer to a mark VI?

  2. #2
    Distinguished SOTW Member
    Forum Contributor 2012
    hgiles's Avatar
    Join Date
    Aug 2005
    Location
    Charlottesville VA
    Posts
    4,843

    Default Re: Selmer Series III v Yamaha 82Z

    :-)
    "The key to improvising is being able to play and listen at the same time."

  3. #3

    Join Date
    Apr 2003
    Location
    Massachusetts
    Posts
    663

    Default Re: Selmer Series III v Yamaha 82Z

    I've owned both, and kept the III. The intonation on the Z was troublesome for me. Yamaha sent me different necks to try but it still was off. The III has great modern ergos and sound. The resistance is less than a Series II but can vary with necks. My III has a tad more resistance than my VI but is still very free. The top end and altissimo really sings on the III's. IMO the III is best modern Tenor available, I like them much better than the Reference models.

  4. #4

    Default Re: Selmer Series III v Yamaha 82Z

    Had 4 Z's and a silver plated Serie III,I sold my 1st borgani jubilee for the III,WOW i soon had huge regret.The Z's are FOR ME better,nicer sounding,better ergonomics well just better.I liked the III alot but soon found it to have just 1 sound,bright and not very flexible.I missed the borg big time hence i have a new 1.I adore z's and again for me there much more flexible,bigger bottom end and they sing and are so easy a blower.I still think the III is selmers best modern tenor they make.I tested a black III years ago and that was great.I dont like the ref 54's i blew but have blew a few great ref 36's.Which is closer to a MK6,for me the Z and yes there loud and i like that
    Wedding Solo Saxophone Player For Hire www.smoothsaxsounds.com
    www.youtube.com/saxdaveboy www.soundcloud.com/daveysax1 Tenor Yamaha YTS82Z UL WOF# Yamaha VI Silver plated neck Sakshama B Marsalis G mp, Soprano Elkhart Deluxe, Alto Elkhart Deluxe , www.facebook.com/thedandbjazzproject?www.dbjazz.co.uk

  5. #5

    Join Date
    Jan 2010
    Location
    London
    Posts
    605

    Default Re: Selmer Series III v Yamaha 82Z

    Thanks for the replies guy. I've been a bit devious, as I have both horns at the moment. I just wanted to see other people's opinions. I have been playing a Yamaha 82Z for eight years now and really like it. But I've just got hold of an eleven year old Selmer III and I have to say I really like a lot about it. It has this sort of ring to the tone, the bottom is really fat. It gives me that Breckerish fat bottom, that I just can't achieve on the Yamaha, I thought it was just me, or my mouthpiece/reed combination. I prefer the palm keys on the Yamaha, the rest of the keywork feels pretty similar. The one thing I am having a problem with is the Selmers action, it feels really heavy. I can't play as fast on it. Are all Selmers like this? Is it something I just need to get used to?

  6. #6
    Distinguished SOTW Technician BOPITY FUNK's Avatar
    Join Date
    Apr 2008
    Location
    West Midlands, England UK.
    Posts
    2,523

    Default Re: Selmer Series III v Yamaha 82Z

    If the 111series had followed the MKV1--the whole 'MkV1 thing' would never have happened! back in 1973/74 a horn like the SA 'serie 111' would have blown everything away--trouble is the MK V11 really was the worst thing that could have happened to Selmer---- not saying the 7's are bad horns but-----------------!

  7. #7
    Forum Contributor 2009 cleger's Avatar
    Join Date
    Jan 2005
    Posts
    4,429

    Default Re: Selmer Series III v Yamaha 82Z

    Have I just had a stroke or something? I can't make heads or tails out of several of the posts on this thread.

  8. #8
    Distinguished SOTW Member
    Forum Contributor 2008-2013
    Dr G's Avatar
    Join Date
    Feb 2003
    Posts
    21,012

    Default Re: Selmer Series III v Yamaha 82Z

    Quote Originally Posted by mrsaxpunk View Post
    The one thing I am having a problem with is the Selmers action, it feels really heavy. I can't play as fast on it. Are all Selmers like this? Is it something I just need to get used to?
    The Serie III incorporated several "improvements" in the mechanism - some of which, I think, were not so great. The spring loaded rods in some of the keys, for instance, likely create more friction and thus require more spring tension. That said, most horns are sprung on the heavy side and can be lightened considerably when the horn is disassembled and properly set up. I went through my Serie III, making sure to get all the rods moving freely, cleaned and lubed (removing the old lube from the tubes with solvent and pipe cleaners), and then reset the spring tension. It makes a world of difference.
    Go for The Tone,

    g



    "When you are doing well, don't forget to do good." - Sichan Siv.

  9. #9
    Super Action Man's Avatar
    Join Date
    May 2011
    Location
    Calgary, Alberta, Canada
    Posts
    248

    Default Re: Selmer Series III v Yamaha 82Z

    I've tried both, and found them to be almost the same in every way, except that the tone on the III seemed less harsh and more refined. I went with it. Both were vey recent models. The thing I like best about both these horns is the response.

  10. #10
    The most prolific Distinguished SOTW poster
    Forum Contributor 2007-present
    gary's Avatar
    Join Date
    Feb 2003
    Location
    Hawaiian homey, German resident, doing time in Texas
    Posts
    25,571

    Default Re: Selmer Series III v Yamaha 82Z

    I replaced my 82 Z UL (no F# key) with a Serie III. The Serie III was the best tenor I've ever played, period.

    That's not to say it's the one I've preferred the most (my present JK is because of its sound), but the Serie III was absolutely wonderful. The Z I replaced was also a superb horn. The only real difference to me was in the sound. To me, the Selmer had a shade more depth and body to the sound but it was enough that I could hear and enough to pay the difference for.
    ____________________________________________________
    You can't blow it if you haven't lived it.

    TK Melody UL soprano
    Selmer S80 Serie II alto
    Julius Keilwerth SX90R tenor


  11. #11
    Nevillesax's Avatar
    Join Date
    Apr 2010
    Location
    Melbourne Australia
    Posts
    461

    Default Re: Selmer Series III v Yamaha 82Z

    I use a Serie III about 11 yrs old too...it's great, not too bright, big sound.
    As Dr G says the action can be lightened...it will probably always feel a bit bigger in your hands than the Yammy but you will get used to it pretty quickly

  12. #12

    Default Re: Selmer Series III v Yamaha 82Z

    I actually prefer the Z to the III. They are both bright-ish horns with modern ergos and intonation, but I find the LH pinky table on modern Selmers to be cumbersome, and I find the tone of the III to be kind of... inflexible. It just doesn't have that much subtlety for me, whereas once you get to know the Z I think the tone is a bit more lively and dynamic.

  13. #13

    Join Date
    Jan 2010
    Location
    London
    Posts
    605

    Default Re: Selmer Series III v Yamaha 82Z

    I have to say, I'm slowly falling in love with this Selmer. It seems to be getting lighter/faster, whether that's me getting used to it, or the sax just needs to be played a bit, I'm not sure. It has a resistance that you can lean against, then push against, then you can push past the resistance and really scream. I don't like the palm D and have added one of those rubber risers, which has sorted that out. I actualy prefer the LH pinky table on the Selmer, they seem to move really fast. I'm actually in turmoil, I really didn't expect to like this Selmer more than my 82Z. I haven't played it on a gig yet, so things might change.

  14. #14

    Default Re: Selmer Series III v Yamaha 82Z

    I know this is a selmer vs. yamaha thread, but this clip of Roger Manins comparing the Mauriat Horns with the Selmer Series III is interesting, I think the Series III sounds fantastic - if I ever need a back up for my VI that's where I'll be looking... The Series III starts around 2:20.

    http://www.youtube.com/watch?v=fDr5HZ4bqkY

  15. #15

    Join Date
    Jan 2010
    Location
    London
    Posts
    605

    Default Re: Selmer Series III v Yamaha 82Z

    Quote Originally Posted by bariandyf View Post
    I know this is a selmer vs. yamaha thread, but this clip of Roger Manins comparing the Mauriat Horns with the Selmer Series III is interesting, I think the Series III sounds fantastic - if I ever need a back up for my VI that's where I'll be looking... The Series III starts around 2:20.

    http://www.youtube.com/watch?v=fDr5HZ4bqkY
    Interesting. I tried a Mauriat recently, I don't think I'd ever get used to those convex pearls and the palm keys are ridiculously placed.

  16. #16

    Join Date
    Jan 2010
    Location
    London
    Posts
    605

    Default Re: Selmer Series III v Yamaha 82Z

    One issue I'm having with the series III is, sluring octaves seems a little more difficult, than on my 82Z. Especially middle C to high C, I need to tighten my embochure slightly for the high C to speak. Anybody else have this issue with a series III? Any solutions?

  17. #17
    Distinguished SOTW Member
    Forum Contributor 2008-2013
    Dr G's Avatar
    Join Date
    Feb 2003
    Posts
    21,012

    Default Re: Selmer Series III v Yamaha 82Z

    Quote Originally Posted by mrsaxpunk View Post
    One issue I'm having with the series III is, sluring octaves seems a little more difficult, than on my 82Z. Especially middle C to high C, I need to tighten my embochure slightly for the high C to speak. Anybody else have this issue with a series III? Any solutions?
    Commit to the horn for a while - it blows differently than the Z.

    Regarding the octaves - commit to spending a lil' time to voicing overtones, playing scales and bugling without using the octave key. It shouldn't be the embouchure as much as voicing in the throat that leads to your success.
    Go for The Tone,

    g



    "When you are doing well, don't forget to do good." - Sichan Siv.

  18. #18
    Distinguished SOTW Technician BOPITY FUNK's Avatar
    Join Date
    Apr 2008
    Location
    West Midlands, England UK.
    Posts
    2,523

    Default Re: Selmer Series III v Yamaha 82Z

    Quote Originally Posted by mrsaxpunk View Post
    One issue I'm having with the series III is, sluring octaves seems a little more difficult, than on my 82Z. Especially middle C to high C, I need to tighten my embochure slightly for the high C to speak. Anybody else have this issue with a series III? Any solutions?
    Might be the "old lower octave pip problem" --on the Series111 alto's the octave pip(vent tube)--lower was/is too small in diameter-- 2mm-- should around 2.5mm. Selmer know about this but whether it's been rectified I don't know.
    I drilled my alto pip to 2.5mm and octaves G-G, G#-G# dont 'crack up' anymore

  19. #19

    Join Date
    Jan 2010
    Location
    London
    Posts
    605

    Default Re: Selmer Series III v Yamaha 82Z

    Regarding the octaves - commit to spending a lil' time to voicing overtones, playing scales and bugling without using the octave key. It shouldn't be the embouchure as much as voicing in the throat that leads to your success.

    Thanks Dr. G, but that's not the issue.

  20. #20
    Distinguished SOTW Member saxobari's Avatar
    Join Date
    Sep 2003
    Location
    Canada ,Ontario
    Posts
    2,717

    Default Re: Selmer Series III v Yamaha 82Z

    I did owned the tenor Z,and soon after I bought it,got tired of it fast!
    I got my Serie III after I sold the Z and never looked back.To me there is no comparaison,the III bottom line has a better core,richness and is nt bright at all,to what some will say.
    Reeds,mpcs and that will make any horn sound bright,not the III Selmers.
    I still love my III after about four years now.Fantastic horn.
    Regards
    Saxobari
    Tenor Selmer Serie III - Dukoff Stubby 7*(Eric Falcon)Otto Link Slant 7
    Alto Yamaha Ul.82Z: Selmer Soloist .82 refaced by (Ted Klum s work)
    Soprano Yamaha 62 Purple L. ,Selmer Soloist .64 (Joe G.Soprano Planet)
    Vintage Dukoff Miami 6,Otto Link Slant 7

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •